No products in the cart.
Electronic Parts
Showing 361–396 of 628 results
- Detection & Sensor Module, Electronic Parts, Module, Trending Items
Pulse Heart Rate Sensor Module
Stock outDetection & Sensor Module, Electronic Parts, Module, Trending ItemsPulse Heart Rate Sensor Module
Out of stockThe Pulse Heart Rate Sensor Module is an optical pulse sensor designed to measure heart rate by detecting blood flow changes through a fingertip or earlobe. It provides an analog output signal that can be easily interfaced with Arduino, ESP32, Raspberry Pi, and other microcontroller platforms.
SKU: EAP-001399 - Component, DIY Items, Electronic Parts, Switch, Button & Connector
Push Button (SMD)
558 in stock- Product Name : Tact Switch
- Mounting Type : SMD
- Switch Size : ( 4 x 4 x 3) mm
- Material : Plastic, Metal, Electric Parts
- Rated Load：0.5A 12V DC
- Dielectric strength：250V AC for 1 min
- Insulation Resistance ：100MΩmin，100V DC
- Operating Temperature range : -30℃ to +85℃
SKU: EAP-000470 - Detection & Sensor Module, Electronic Parts, Module
R502 Capacitive Fingerprint Sensor Module
In StockDetection & Sensor Module, Electronic Parts, ModuleR502 Capacitive Fingerprint Sensor Module
2 in stockThe R502 Capacitive Fingerprint Sensor Module is a compact round fingerprint recognition module designed for biometric identification and access control applications. It uses a 508 DPI capacitive fingerprint sensor with a 192 × 192 sensing array and supports fast fingerprint acquisition and verification through a 3.3V TTL UART interface. The module supports fingerprint enrollment, 1:1 verification, and 1:N identification, with a built-in touch detection function that can wake the system when a finger is placed on the sensing surface. Its small round form factor and waterproof design make it suitable for door locks, access control systems, safes, cabinets, embedded devices, and other biometric applications.
SKU: EAP-001400 - Component, Electrical, Electrical & Mechanical, Electronic Parts, Power Supply, Raspberry Pi
Raspberry Pi 4 Adapter (15.3W, 5V, 3A)
In StockComponent, Electrical, Electrical & Mechanical, Electronic Parts, Power Supply, Raspberry PiRaspberry Pi 4 Adapter (15.3W, 5V, 3A)
The Raspberry Pi 15W USB-C Power Supply is designed to power Raspberry Pi 4 and Raspberry Pi 400 computers. Featuring a 1.5m captive USB cable, this reliable, high-quality power supply provides an output of 5.1V / 3.0A DC via a USB-C connector, for all the power your Raspberry Pi 4 or 400 will need.
SKU: n/a - Development Board, Electronic Parts, Raspberry Pi, Trending Items
Raspberry Pi 4 Model B (2GB)
In StockDevelopment Board, Electronic Parts, Raspberry Pi, Trending ItemsRaspberry Pi 4 Model B (2GB)
1 in stockThe Raspberry Pi 4B 4GB supports dual 4K displays through its micro-HDMI ports, making it perfect for high-definition video and creative endeavours. It has dual-band WiFi 2.4 GHz and 5.0 GHz IEEE 802.11ac, Bluetooth 5.0, and Gigabit Ethernet for a consistent connection.
SKU: EAP-001394 - Development Board, Electronic Parts, Raspberry Pi, Trending Items
Raspberry Pi 4 Model B (4GB)
In StockDevelopment Board, Electronic Parts, Raspberry Pi, Trending ItemsRaspberry Pi 4 Model B (4GB)
5 in stockThe Raspberry Pi 4B 4GB supports dual 4K displays through its micro-HDMI ports, making it perfect for high-definition video and creative endeavours. It has dual-band WiFi 2.4 GHz and 5.0 GHz IEEE 802.11ac, Bluetooth 5.0, and Gigabit Ethernet for a consistent connection.
SKU: EAP-001330 - Development Board, Electronic Parts, Raspberry Pi
Raspberry Pi 5 (8GB)
Out of stockThe Raspberry Pi 5Â uses the BCM2712, featuring a quad-core Cortex-A76 CPU at 2.4 GHz, an 800 MHz VideoCore VII GPU, and a separate RP1 southbridge chip designed in-house. Raspberry Pi has also developed its own chips outside of its partnership with Broadcom.
SKU: EAP-001329 - Case and Frame, Component, Development Board, Electronic Parts, Raspberry Pi
Raspberry Pi 5 Case With Fan
Stock outCase and Frame, Component, Development Board, Electronic Parts, Raspberry PiRaspberry Pi 5 Case With Fan
Out of stock- The Raspberry Pi Case for Raspberry Pi 5 is a clip-together four-part enclosure with an active cooling fan.
- It keeps your Raspberry Pi 5 at a comfortable operating temperature even under heavy load.
SKU: EAP-001335 - Electronic Parts, Module
RF Transmitter Module (433MHz)
14 in stock- Transmission distance: 50-100m
- Working voltage : 3.5-12V (DC)
- Modulation: AM
- Transfer rate: 4kB/s
- Transmit power: 10mW
- Emission frequency: 433MHz
- External antenna: 25cm ordinary multi-core or single core line
- Pinout from left to right: DATA; VCC; GND
- Dimensions (L x W): 19 x 19mm
SKU: EAP-001115 - Electronic Parts, Module, Optoelectronic & LED Module
RGB LED Module
80 in stock- The use of plug-in full-color LED.
- RGB trichromatic limiting resistor to prevent burnout.
- Through the PWM adjusting, three primary colors can be mixed to obtain different colors.
- With a variety of single-chip interface.
- The working voltage: 5V.
- LED drive mode: common cathode driver
SKU: EAP-000420 - Component, DIY Items, Electronic Parts, Switch, Button & Connector
Round Cap for Square tactile Switch (12x12x7.3 mm)
In StockComponent, DIY Items, Electronic Parts, Switch, Button & ConnectorRound Cap for Square tactile Switch (12x12x7.3 mm)
- Easy to install, good quality for long time use
- Great replacement for the old or broken buttons cap on the tactile switch
- Fits on a 12 x 12 x 7.3 mm tactile push button switch.
- Contact resistance: 50m Max (initial)
- Insulation resistance: 100 M min DC (250 V)
- Color: blue, green, red and black
SKU: n/a - Detection & Sensor Module, Electronic Parts, Module
Round Capacitive Fingerprint Sensor Module (UART TTL)
Stock outDetection & Sensor Module, Electronic Parts, ModuleRound Capacitive Fingerprint Sensor Module (UART TTL)
Out of stockThe Round Capacitive Fingerprint Sensor Module is a compact biometric fingerprint recognition module designed for fingerprint identification, verification, and access-control applications. It integrates a capacitive fingerprint sensor with an internal fingerprint processing and recognition algorithm, allowing the module to capture and process fingerprints directly without requiring an external image-processing system. The module communicates with a host microcontroller through a 3.3V TTL UART interface and supports up to 200 fingerprint templates. Its compact round design makes it suitable for embedded applications such as smart locks, access control systems, attendance devices, safes, cabinets, and security equipment.
SKU: EAP-001420 - Component, DIY Items, Electrical, Electrical & Mechanical, Electronic Parts, Switch, Button & Connector, Switch, Button & Connector, Trending Items
RS232 Serial Port DB9 Connector
In StockComponent, DIY Items, Electrical, Electrical & Mechanical, Electronic Parts, Switch, Button & Connector, Switch, Button & Connector, Trending ItemsRS232 Serial Port DB9 Connector
- DB9 Male Connector & Female Connector
- Solder Type
- Nickel Thermoplastic Insulator
- Brand New Product and Easy to use, With Cover
- Color: Silver and blue : 9 Pin Connector
SKU: n/a - Detection & Sensor Module, Electronic Parts
RS485 MODBUS PIR Motion Sensor (9~24V)
Out of stock- Description : RS485 Infrared Sensor Switch
- Power Source : 9-24 V/DC
- Quiescent Current : 10mA
- Detection Diameter : 8m (height 3m)
- Detection Angle : 360 degree
- Working Temperature : – 10°C-50°C
- Humidity : < 95% RH, no condensation
- Installation Height : 2-5m, 3m Recommended
- Led Indication : Adjustable
- Output Mode : RS485 Bus, Up To 400 Nodes
- Protocol : MODBUS or Custom protocol
SKU: EAP-001147 - Component, Electronic Parts, SMD Transistor, Transistor
S8050 (J3Y) NPN Transistor (SOT-23)
1746 in stock- Product Name: SOT23 Transistor;
- Current: 500mA
- Voltage: 25V
- HFE: 200-350
- Transistor Type: NPN
- Widely Used in Switching Circuit Area, Lead-Free / RoHS Compliant Electronics Component / Surface Mount
- High Forward Surge Current Capability / High Temperature Soldering / Low Power Loss, High Efficiency
SKU: EAP-001208 - Component, DIY Items, Electronic Parts, Sensors
SCT013 Current Transformer
- Input Current : 0-30A / 0-10A
- Output Mode: 0-1V
- Frequency: 50HZ-150KHZ
- Opening Size: 13 x 13mm
- Output Plug 3.5mm
- Dielectric Strength 6000V AC/1min
- Suitable for lighting equipment, AC motors, air compressors, monitoring, current measurement, and protection
- Meet UL94-V0 flame retardant properties
SKU: n/a - Electronic Parts, Module
Sensor Shield V5 Expansion Board For Arduino
92 in stock- Retain the merits of the V4.0 version
- Laminated design
- PCB immersion gold processing technology
- IIC interface
- Bluetooth module communication interface
- SD card module communication interface
- APC220 wireless modules communication interface
- RB URF v1.1 ultrasonic sensors interface
SKU: EAP-000699
