No products in the cart.
Module
Showing 1–36 of 239 results
- Electronic Parts, Module, Relay Module
1 Channel Relay Module (5V,10A, HIGH ACTIVE)
222 in stock- 1-channel 5V control Single-Pole Double-Throw (SPDT) AC power relay board can be controlled directly via a microcontroller and switch up to 10 amperes at 250 VAC
- Inputs are isolated to protect any delicate control circuitry
- The default state of the relay when the power is off for COMM (power) to be connected to NC (Normally Closed). This is the equivalent of setting the relay board IN pin to HIGH (has +5v sent to it)
- Relay Max Switching Voltage: 250 Volts AC; Relay Max Switching: Current: 10 Amps AC; Relay Control Voltage: 5.0V directly via microcontroller (Arduino, AVR, PIC, ARM, Board X, Raspberry Pi, MSP430, etc)
SKU: EAP-001176 - DIY Items, Electronic Parts, Module, Trending Items
18650 DIY Spot Welder (12V)
8 in stock- Material: PCB
- Suitable for: 18650/26650/32650 lipo battery
- System voltage: 12-V-14.6V
- Working current: 90-150A
- It is recommended to install the product by the people who have basic electrical knowledge and hands-on ability.
SKU: EAP-001247 - DIY Items, Electronic Parts, Module, Trending Items
18650 Li-ion 1S BMS Module (3A)
4528 in stock- High-accuracy voltage detection circuit;
- Terminal of the charger using high voltage device;
- Built-in three-stage over-current detection circuit (over-current 1, over-current 2, load short circuit);
- MOS transistor can control the battery charge and discharge;
SKU: EAP-001226 - Electronic Parts, Module
37 in 1 Sensor Kit With Bag
3 in stock- For beginners who are interested in Arduino
- A complete set of Arduino’s most common and useful electronic components
- Infrared sensor receiving module
- Laser sensor module
- Temperature and humidity sensor module
- Infrared sensor module
- 5v relay module
- Obstacle avoidance sensor module.
SKU: EAP-000774 - Detection & Sensor Module, Electrical, Electrical & Mechanical, Electronic Parts, Module, Sensors, Sensors
37 in Sensor Kit
Stock outDetection & Sensor Module, Electrical, Electrical & Mechanical, Electronic Parts, Module, Sensors, Sensors37 in Sensor Kit
Out of stock- For beginners who are interested in Arduino
- A complete set of Arduino’s most common and useful electronic components
- Infrared sensor receiving module
- Laser sensor module
- Temperature and humidity sensor module
- Infrared sensor module
- 5v relay module
- Obstacle avoidance sensor module.
SKU: EAP-000388 - Electronic Parts, Module, Wireless Module
4 Channel Remote Kit
34 in stock- No. of the channel: 4
- Operating mode: Non-Locking
- Receiver Operating voltage: DC 5V.
- Receiver sensitivity is: -98dB.
- Transmitter Operating voltage: DC 12V
- Transmitting frequency: 315 MHZ.
- Transmitter Operating current: 10mA at 12V.
- Transmitter Radiated power: 10mW at 12V.
- Transmission distance (m): 3 to 5.
SKU: EAP-000418 - Electronic Parts, Module, Motor Driver Module
A3967 Stepper Motor Driver Module
8 in stock- Power supply: 7V to 30V.
- The higher the voltage, the higher the torque at high speeds.
- Adjustable current control from 150mA/phase to 750mA/phase.
- Logic voltage: 5V or 3.3V.
- A3967 microstepping driver.
SKU: EAP-000424 - Electronic Parts, Module, Motor Driver Module
A4988 Stepper Motor Driver Module
131 in stock- Five different micro-steps
- Full step
- Half step
- Quarter step
- Eight steps
- Sixteen steps
- Direction control
- Overcurrent and over-temperature protection
- Adjustable current limit
- Short to ground
- Shorted load protection
- Automatically selects the correct current delay
SKU: EAP-000423 - Five different micro-steps
- DIY Items, Electronic Parts, Module, Trending Items
AC 70V~500V Voltmeter
- Voltage measurement range: AC70-500V;
- Working temperature: -20℃~65℃;
- Measuring rate: 300mS/time
- Reach of power: No additional power supply, directly measuring voltage as a power source, the above scale
- Tolerance : ±1%
- Current: Red <23ma> </23ma> , Green <18ma> </18ma> , Blue <17ma> </17ma>
- Weight: 18g
SKU: n/a - Electronic Parts, Module
AHT10 Temperature and Humidity Sensor Module
Out of stock- Interface type: I2C
- Working voltage: 1.8 – 6.0 V
- Interface size: 4*2.54mm pitch
- Humidity accuracy: typical ± 2%
- Humidity resolution: 0.024%
- Temperature accuracy: typical ± 0.3 ° C
- Temperature resolution: Typical 0.01 °C
- Working temperature: -40°C–85°C
SKU: EAP-001129 - Electronic Parts, Module, Power Supply Module
AMS1117-3.3V Voltage Regulator Module
Out of stockThis voltage regulator module is based on the AMS1117 3.3V regulator. It is capable of regulating a wide range of input voltage (4.0 to 12V) down to a fixed 3.3V output at up to 1A (Vin = 4.5V). Standard 0.1″ header pins provide a means of connecting to its input and output terminals. These header pins have also been conveniently placed so that the module can be inserted face down into standard.
SKU: EAP-000911 - Electronic Parts, Module, Power Supply Module
AMS1117-3.3V Voltage Regulator Module
Out of stock- 3.3V Output
- 5V Input. Can use higher input voltages, but see our notes below about derating the current at higher voltages
- 800mA maximum rated current. 500mA recommended max
- Power LED
- Short circuit and thermal protection built-in
- Small footprint
SKU: EAP-000880 - Electronic Parts, Module, Power Supply Module
Breadboard Power Supply Module(3.3V, 5V)
59 in stock- Breadboard power supply module, compatible with 5V, 3.3V.
- Apply to MB102 breadboard
- Input voltage: 6.5-12 V (DC) or USB power supply
- Output voltage: 3.3V/5V can switch over
- Maximum output current: <700 ma
- Fluctuation two road independent control can switch over to 0 V, 3.3 V, 5 V
- On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use.
SKU: EAP-000643 - Electronic Parts, Module
CH376 USB Host Interface Module
4 in stock- The CH376 chip internal curing FAT file system, file operation is simple, fast,
- Support U disk, USB hard disk, USB flash drive and USB card reader, USB storage device
- Standard Capacity SD card support, high capacity HC-SD card as well as protocol-compatible MMC, TF card
- Support a variety of communication interfaces: 8-bit parallel, SPI interface and asynchronous serial
- Compatibility: Equipment manner compatible with CH372 compatible host with CH375
SKU: EAP-001166 - Electronic Parts, Module, Motor Driver Module
CNC Shield V3
8 in stock- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- Coolant enable
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
SKU: EAP-000701 - Electronic Parts, Module, Power Supply Module
DC 12V to 3.3V,5V and 12V Power Supply module
20 in stock- Output power on/off switch
- Two-row multiple pin outputs, easy to use and connect
- Red LED illuminates when input DC power is supplied and output is turned ON.
- Small and Handy Module.
- Dual-side plate design.
- Easy to use.
SKU: EAP-000515 - Electronic Parts, Module
DC Voltage Sensor Module (0~25V)
11 in stock- Voltage input range: DC 0-25V
- Voltage detection range: DC 0.02445V-25V
- Voltage Analog Resolution: 0.00489V
- DC input connector: Terminal cathode connected to VCC, GND negative pole
- Output interface: “+” connect 5/3.3V, “-” connect GND, “s” connect the Arduino AD pins
SKU: EAP-001135 - DIY Items, Electronic Parts, Module, Trending Items
DC Voltmeter (0~30V, Red, 0.36″)
27 in stock- Measuring range: 0-30 V
- Maximum Input Voltage: 30V
- Display Color: Red
- Dimension: 23 x 15 x 10mm (L x W x H)
- Display Type: 3 Digit 0.36″ LED display
- Cable Length: 195mm
- Display Type: 3Digit 0.36” LED Display
- 0.1V for above 10V, 0.01V for below 10V
SKU: EAP-001088 - DIY Items, Electronic Parts, Module, Power Supply Module, Trending Items
DC-DC Step-up Adjustable Power Supply Module (150W, 6A)
In StockDIY Items, Electronic Parts, Module, Power Supply Module, Trending ItemsDC-DC Step-up Adjustable Power Supply Module (150W, 6A)
64 in stock- Input voltage :10-32V
- Output voltage: 12-35V (adjustable)
- Output Current: 10A (MAX)
- Input Current: 16A (MAX) (Please enhance heat dissipation if more than 10A)
- The non-isolated step-up power conversion module
- Onboard LED illuminates when the voltage is applied to the module
SKU: EAP-000758 - Electronic Parts, Module
Digital to Analog Stereo Audio Converter Module
8 in stock- Digital to Analogue Stereo Audio Converter Module
- Supports Major Audio Data Interface formats.
- Based on a multibit delta-sigma modulator with a linear analogue low-pass filter.
- Complete stereo sound analog output systems, including interpolation, multibit D/A conversion and analog output filtering in a 10-pin package.
SKU: EAP-001143 - Electronic Parts, Module, Motor Driver Module
DRV8833 2 Channel Motor Driver Module
33 in stock- Dual-H-bridge motor driver:
- Operating voltage: 2.7‌‌ V to 10.8 V
- Output current: 1.2 A continuous (2 A peak) per motor.
- Motor outputs can be paralleled to deliver 2.4 A continuous (4 A peak) to a single motor.
- 3V- and 5V Logic Voltage compatible
- Under-voltage lockout and protection against over-current and over-temperature.
- Reverse-voltage protection circuit.
- Current limiting can be enabled by adding sense resistors.
SKU: EAP-000877
