No products in the cart.
Module
Showing 109–144 of 239 results
- Detection & Sensor Module, Electronic Parts, Module
R502 Capacitive Fingerprint Sensor Module
In StockDetection & Sensor Module, Electronic Parts, ModuleR502 Capacitive Fingerprint Sensor Module
2 in stockThe R502 Capacitive Fingerprint Sensor Module is a compact round fingerprint recognition module designed for biometric identification and access control applications. It uses a 508 DPI capacitive fingerprint sensor with a 192 × 192 sensing array and supports fast fingerprint acquisition and verification through a 3.3V TTL UART interface. The module supports fingerprint enrollment, 1:1 verification, and 1:N identification, with a built-in touch detection function that can wake the system when a finger is placed on the sensing surface. Its small round form factor and waterproof design make it suitable for door locks, access control systems, safes, cabinets, embedded devices, and other biometric applications.
SKU: EAP-001400 - Electronic Parts, Module
RF Transmitter Module (433MHz)
14 in stock- Transmission distance: 50-100m
- Working voltage : 3.5-12V (DC)
- Modulation: AM
- Transfer rate: 4kB/s
- Transmit power: 10mW
- Emission frequency: 433MHz
- External antenna: 25cm ordinary multi-core or single core line
- Pinout from left to right: DATA; VCC; GND
- Dimensions (L x W): 19 x 19mm
SKU: EAP-001115 - Electronic Parts, Module, Optoelectronic & LED Module
RGB LED Module
80 in stock- The use of plug-in full-color LED.
- RGB trichromatic limiting resistor to prevent burnout.
- Through the PWM adjusting, three primary colors can be mixed to obtain different colors.
- With a variety of single-chip interface.
- The working voltage: 5V.
- LED drive mode: common cathode driver
SKU: EAP-000420 - Detection & Sensor Module, Electronic Parts, Module
Round Capacitive Fingerprint Sensor Module (UART TTL)
Stock outDetection & Sensor Module, Electronic Parts, ModuleRound Capacitive Fingerprint Sensor Module (UART TTL)
Out of stockThe Round Capacitive Fingerprint Sensor Module is a compact biometric fingerprint recognition module designed for fingerprint identification, verification, and access-control applications. It integrates a capacitive fingerprint sensor with an internal fingerprint processing and recognition algorithm, allowing the module to capture and process fingerprints directly without requiring an external image-processing system. The module communicates with a host microcontroller through a 3.3V TTL UART interface and supports up to 200 fingerprint templates. Its compact round design makes it suitable for embedded applications such as smart locks, access control systems, attendance devices, safes, cabinets, and security equipment.
SKU: EAP-001420 - Detection & Sensor Module, Electronic Parts
RS485 MODBUS PIR Motion Sensor (9~24V)
Out of stock- Description : RS485 Infrared Sensor Switch
- Power Source : 9-24 V/DC
- Quiescent Current : 10mA
- Detection Diameter : 8m (height 3m)
- Detection Angle : 360 degree
- Working Temperature : – 10°C-50°C
- Humidity : < 95% RH, no condensation
- Installation Height : 2-5m, 3m Recommended
- Led Indication : Adjustable
- Output Mode : RS485 Bus, Up To 400 Nodes
- Protocol : MODBUS or Custom protocol
SKU: EAP-001147 - Electronic Parts, Module
Sensor Shield V5 Expansion Board For Arduino
92 in stock- Retain the merits of the V4.0 version
- Laminated design
- PCB immersion gold processing technology
- IIC interface
- Bluetooth module communication interface
- SD card module communication interface
- APC220 wireless modules communication interface
- RB URF v1.1 ultrasonic sensors interface
SKU: EAP-000699 - Electronic Parts, Module, Wireless Module
SIM800A GSM Module
Out of stock- Quad-band 850/900/1800/1900MHz.
- GPRS class 2/10.
- Input Voltage : 9V-12V DC.
- Control via AT commands (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT command set).
- Configurable baud rate.
- Built-in SIM Card holder.
- Built-in Network Status LED.
SKU: EAP-000702 - Electronic Parts, Module
SIM800C GSM GPRS Module
Out of stock- Chip: SIM800C
- Band: 850/900/1800/1900MHz
- GPRS multi-slot class: 12/10
- GPRS mobile station class: B
- Compliant to GSM phase 2/2+ – Class 4 (2 W @ 850/900 MHz) – Class 1 (1 W @ 1800/1900MHz)
- Control via AT commands (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands)
- Power input: DC5V or received by a lithium battery input VBAT and GND.
- Supports MCU level: 5V / 3.3V for TTL logic (Such as the common 51 and the arduino is 5v, STM32 is the 3.3v)
- Antenna use: IPEX antenna interfaces, you can use the version PCB antenna or antenna IPEX-SMA- peppers
SKU: EAP-001130 - Electronic Parts, Module
SIM800L GSM GPRS Module
Out of stock- Quad-band 850/900/1800/1900MHz
- GPRS mobile station class B
- Supports Real-Time Clock
- Supports A-GPS
- Micro SIM Card
- Low power consumption, 1mA in sleep mode
- GPRS multi-slot class12 connectivity: max. 85.6kbps (down-load/up-load)
- Controlled by AT Command (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands).
SKU: EAP-001163 - Detection & Sensor Module, Electronic Parts, Module
Square Capacitive Fingerprint Sensor Module (UART TTL)
In StockDetection & Sensor Module, Electronic Parts, ModuleSquare Capacitive Fingerprint Sensor Module (UART TTL)
1 in stockThe Square Capacitive Fingerprint Sensor Module is a compact biometric fingerprint recognition module that integrates a capacitive fingerprint sensor with an internal fingerprint processing algorithm. It communicates with a host microcontroller through a UART TTL interface and supports fingerprint enrollment, template storage, fingerprint matching, and identification. Its compact square form factor and low-power design make it suitable for embedded security and biometric applications. The module is designed for easy integration with microcontrollers and electronic control systems where fingerprint authentication is required.
SKU: EAP-001421 - Electronic Parts, Module, Wireless Module
SX1278 LoRa Module(Ra-02, 433MHZ)
47 in stock- LoRa ™ Spread Spectrum modulation technology
- Constant RF power output at + 20dBm-100mW voltage change
- Half-duplex SPI communication
- Supports FSK, GFSK, MSK, GMSK, LoRa ™ and OOK modulation modes
- Automatic RF signal detection, CAD mode and very high speed AFC
- Packet engine with CRC up to 256 bytes
- Small footprint dual-row stamp-hole patch package
- Shielded housing
- Spring Antenna
SKU: EAP-000789 - Detection & Sensor Module, Electronic Parts, Module
TCRT 5000 Dual Channel Line Tracking sensor
In StockDetection & Sensor Module, Electronic Parts, ModuleTCRT 5000 Dual Channel Line Tracking sensor
64 in stock- Operating Voltage: 3.5V-5V
- Supply Current: 15mA
- Optimal Sensing Distance: 3mm
- Designed with the reflected infrared sensor, indicator light.
- Built in a potentiometer for sensitivity control.
- On-board LM393 voltage comparator chip and infrared sensing probe TCRT5000L
- Signal detection sensitivity can adjust
- Reserve all the way more circuits (P3 voltage drawn)
SKU: EAP-000915 - Detection & Sensor Module, Electronic Parts, Module
TCS230/TCS3200 Color Sensor Module
31 in stock- Chip: TCS230
- TCS3200 is TCS230 upgrade version, the better.
- Power supply: 3-5V
- Output frequency voltage : 0 -5V
- Anti-light interference.
- White LED, can control the on and off.
- Can detect non-luminous object color.
- Dimensions: 32 x 24 x 20 mm (LxWxH)
SKU: EAP-001194 - Detection & Sensor Module, Electronic Parts, Module
TCS34725 RGB Sensor Module
2 in stock- Operating Voltage: 3.3V
- Supply Voltage: 3.3V-5V
- The TCS3472 device provides digital return values for red, green, blue (RGB) and bright light sensing
- Color management is more accurate.
- The high sensitivity.
- Wide dynamic range.
- IR shading filters make the TCS3472 ideal.
SKU: EAP-001196 - Detection & Sensor Module, Electronic Parts, Module
TEMT6000 Ambient Light Sensor Module
13 in stock- Max.sensitivity : 570nm.
- Semi sensitivity angle: +/-60degree.
- Although the device is very sensitive to ambient light, it suppresses the infrared (IR) spectrum, providing a higher visible spectral responsiveness similar to the “human eye.”
- It’s brand new, good quality & high performance.
- Sensitive to visible light only, no additional filters, good linear output.
SKU: EAP-001142 - Detection & Sensor Module, Electronic Parts, Module
Tilt Sensor Module(SW-520D)
9 in stock- Using high-sensitivity switch SW 520D as the sensor.
- The module is equipped with fixed bolt hole for convenient installation.
- Using LM393 wide voltage comparator, clean signal, good wave form, strong driving ability with output of more than 15 mA.
- The working voltage of 3.3V to 5V.
- Small PCB size:3.2cm x 1.4cm.
- Digital output form: digital switch output (0 and 1).
SKU: EAP-000723 - Electronic Parts, Module, Motor Driver Module
TMC2208 Stepper Motor Driver Module
4 in stock- Voltage range: 3.3-5V
- Maximum current: 1.2A per phase (continuous, with cooling), 2A peak per phase
- Works with 3.3V and 5V signals
- Comes with heatsink for better cooling
- Has StealthChop technology for quieter stepper motors
- Has SpreadCycl technology for smoother movements
SKU: EAP-000747 - Battery Charging Module, DIY Items, Electronic Parts, Module, Trending Items
TP4056 Lithium Battery Charging Module(Type-C)
In StockBattery Charging Module, DIY Items, Electronic Parts, Module, Trending ItemsTP4056 Lithium Battery Charging Module(Type-C)
509 in stock- Input interface: Type C
- Current Protection: Yes
- Charging mode: Linear charging.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.5V.
- Full charge voltage: 4.2V.
SKU: EAP-000642 - Battery Charging Module, DIY Items, Electronic Parts, Module, Trending Items
TP5100 Li-ion Fast Charging Module (2A)
In StockBattery Charging Module, DIY Items, Electronic Parts, Module, Trending ItemsTP5100 Li-ion Fast Charging Module (2A)
57 in stock- Input voltage: 5-18V DC power supply
- Charge status: full and unloaded blue lights, charging red
- Double 8.4v / 4.2v lithium rechargeable single
- Programmable charge current. 0. 1A-2A
- Wide operating voltage, maximum reach I8V
- Chip temperature protection, overcurrent protection, under voltage protection
- Battery temperature protection, reverse battery shutdown, short circuit protection
SKU: EAP-001288 - Electronic Parts, Module, Optoelectronic & LED Module
Traffic Light Module
219 in stock- Brightness: Normal brightness.
- Voltage: 5V.
- Interface: common cathode red yellow green control.
- Active level: high level
- Operating current: When you use 5V high level output, the red light 13mA, yellow light 13mA, green light 25mA.
SKU: EAP-000419 - Electronic Parts, Module
TRRS Audio Jack Module (3.5mm)
22 in stock- Material: Plastic + metal
- Size: 17 * 12mm
- Audio Jack : 3.5mm
- Mini design, portable and easy to use.
- This breakout board makes it easy to add a TRRS jack to your prototype or project by breaking out each conductor to a standard 0.1″ spaced header.
- Lead to the left channel, right channel, ground wire, and the lines of the plug.
SKU: EAP-001114 - Electronic Parts, Module
Type A USB Module (Female)
12 in stock- The USB female breakout board is made of brand-new and high-quality high-quality materials, which are durable and can meet your needs.
- 4-pin USB A circuit breaker board-has 4 pins including VBUS, D+, D- and GND.
- The USB breakout board is a standard USB Type A female socket and has pins marked on the PDB.
- USB Type A Female Socket Board-Standard USB Type A Female Socket.
- The USB socket breakout board is very suitable for DIY USB power supply, breadboard design, etc.
SKU: EAP-001110 - Electronic Parts, Module
Type A USB Module (Male)
24 in stock- The USB male breakout board is made of brand-new and high-quality high-quality materials, which are durable and can meet your needs
- 4-pin USB A circuit breaker board-has 4 pins including VBUS, D-, D-+ and GND
- The USB breakout board is a standard USB Type A male socket and has pins marked on the PDB
- USB Type A male Socket Board-Standard USB Type A male Socket
- The USB socket breakout board is very suitable for DIY USB power supply, breadboard design, etc
SKU: EAP-001111 - DIY Items, Electronic Parts, Module
Type C Socket Adatper Module (Female)
10 in stockThis USB Type-C Female Module offers a perfect solution for integrating a modern Type-C charging port into your electronic projects. It is widely used to retrofit older legacy hardware (such as upgrading Micro-USB or Mini-USB electronics) to the ubiquitous USB-C interface.
SKU: EAP-001406 - DIY Items, Electronic Parts, Module
Type C Socket Adatper Module (Male)
16 in stockThis Type C Socket Adatper Male Module is an essential component designed for repairing damaged Type-C cable heads or creating custom DIY data and charging cables. Built with a robust metal housing and a compact PCB footprint, it ensures reliable structural integrity and space efficiency for tight custom enclosures.
SKU: EAP-001405 - DIY Items, Electronic Parts, Module, Trending Items
Ultrasonic Mist Maker + USB Driver Module for Humidifier (5V, Ø16mm, Micro USB, Quality Grade-B)
Stock outDIY Items, Electronic Parts, Module, Trending ItemsUltrasonic Mist Maker + USB Driver Module for Humidifier (5V, Ø16mm, Micro USB, Quality Grade-B)
Out of stock- Rated voltage: DC 5V
- Rated current: 300mA
- Power: 1.5-2W
- Resonant frequency: 108-110KHz
- Material: 1.2mm FR-4
- Size：35×18×13mm (LxWxH)
SKU: EAP-001259
