No products in the cart.
Module
Showing 181–216 of 239 results
- Electronic Parts, LCD Display Module, Module
16×2 Character LCD Display Module
- Show control information (on, off, elapsed time), temperature, time, or numbers/special characters
- Access all custom characters stored in ROM
- Debugging for microcontroller projects
- Useful in dark and bright environments
SKU: n/a - Electronic Parts, LCD Display Module, Module
16×2 LCD Display Module + I2C Expander Module
- Arduino IIC/I2C interface was developed to reduce the IO port usage on Arduino board
- I2C adapter allows flexibility in connections
- I2C Reduces the overall wirings
- 16 characters wide, 2 rows
- White text on the green background
- Single LED backlight included can be dimmed easily with a resistor or PWM.
SKU: n/a - DIY Items, Electronic Parts, Module, Relay Module
2 Channel Relay Module (5V,10A)
8 in stock- Switching mains loads
- Home automation
- Battery backup
- High current load switching
- Supply voltage – 3.75V to 6V
- Trigger current – 5mA
- Current when relay is active – ~70mA (single), ~140mA (both)
- Relay maximum contact voltage – 250VAC, 30VDC
- Relay maximum current – 10A
SKU: EAP-000012 - Electronic Parts, LCD Display Module, Module
20×4 Character LCD Display Module (Blue)
17 in stock- LCD display module with blue backlight
- It can display 4-lines * 20-characters
- Small and light appearance, it is easy and convenient to use
- Suitbale for copiers, fax machines, laser printers, industrial test equipment, networking equipment etc
SKU: EAP-000016 - Electronic Parts, LCD Display Module, Module
20×4 LCD Display Module + I2C Expander Module
- 2004 204 20X4 Character LCD Display Module Blue Backlight
- Blue & Green backlight
- Fully assembled and tested Serial LCD 20×4 Module
- Display Format: 20 Characters x 4 lines
- Supply voltage: 5V
- The module can be easily interfaced with a MCU
- The module is a low-power consumption character LCD Module with a built-in controller
SKU: n/a - DIY Items, Electronic Parts, Module, Relay Module
4 Channel Relay Module (5V,10A)
3 in stock- Useful for appliance control
- DC or AC signal, control, you can control the 220V AC load
- There is a normally open and one normally close contact
- The module is compliant with international safety standards, control and load areas isolation trenches
SKU: EAP-000011 - DIY Items, Electronic Parts, Module, Relay Module
8 Channel Relay Module (5V,10A)
47 in stockDC or AC signal, control, you can control the 220V AC load;
There is a normally open and one normally close contact;
The module is compliant with international safety standards, control and load areas isolation trenches.SKU: EAP-000010 - Electronic Parts, Module
Bi-directional Logic Level Converter Module (TXS0108E, 3.3V5V , 8 Channel)
In StockElectronic Parts, ModuleBi-directional Logic Level Converter Module (TXS0108E, 3.3V5V , 8 Channel)
37 in stock- VCCA Voltage level: 1.2V-3.6V
- VCCB Voltage level: 1.65V-5.5V
- It can provide 3.3-5V, 1.8-3.3V level conversion
- Dimension Approx : 26 x 15 mm
- PCB Color: Blue
- 8-bit bi-directional 3.3V-5V/5V-3.3V logic level converter board
- Serial communication interface compatible with UART/IIC/SPI port easily to connect
SKU: EAP-000132 - Electronic Parts, Module
CH340 USB to TTL Converter Module
2 in stock- Built-in USB to TTL Transfer chip.
- Designed to be used for USB to TTL electronic projects.
- TTL interface output, easy to connect to your MCU.
- Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device.
- The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC
- Supports WIN7/VISTA/MAC/LINUX(32 bit /64-bit system)
SKU: EAP-000113 - Electronic Parts, Module
CP2102 USB to TTL Converter Module
4 in stock- Included USB transceiver, without external circuit device
- With 3.3V and 5V dual power output
- With three LEDs: power indicator, data reception indicator, the data transmission indicator, working status
- Meets the USB2.0 specification requirements
- With self-recovery fuse. In the event of the accidental short circuit, it can effectively protect your computer USB port and Downloader
- Asynchronous serial data bus compatible with all handshake and modulation controller interface signals
- The supported data format is 8 data bits, 1 stop bit and parity bits
SKU: EAP-000107 - Detection & Sensor Module, Electronic Parts, Module
DHT11 Temperature and Humidity Sensor Module
In StockDetection & Sensor Module, Electronic Parts, ModuleDHT11 Temperature and Humidity Sensor Module
386 in stock- The module can detect the surrounding environment of the humidity and temperature
- High reliability and excellent long-term stability
- The output from the digital output
- Humidity measuring range: 20%~90%RH(0~50 degree (temperature compensation)
- Temperature measuring range: 0~+50degree
- Humidity measurement accuracy: ±5.0%RH
- Temperature measurement accuracy: ±2.0degree
- Power Supply： 3.3~5.5V DC
- Output： 4 pin single row
- Interchangeability： Fully Interchangeable
- Long-Term Stability： <±1%RH/year
SKU: EAP-000003 - Electronic Parts, Module
DS3231 RTC Module
Out of stock- Weight: 8g
- Operating voltage :3.3 – 5 .5 V
- Clock chip: high-precision clock chip DS3231
- Clock Accuracy :0-40 ℃ range, the accuracy 2ppm, the error was about 1 minute
- Calendar alarm clock with two
- Programmable square-wave output
- Real time clock generator seconds, minutes, hours, day, date, month and year timing and provide valid until the year 2100 leap year compensation
- Chip temperature sensor comes with an accuracy of ± 3 ℃
- Memory chips: AT24C32 (storage capacity 32K)
- I2C bus interface, the maximum transmission speed of 400KHz (working voltage of 5V)
SKU: EAP-000006 - Electronic Parts, Module
Dual-Axis XY Joystick Module
42 in stock- Dimensions: 34 x 34 x 15 (LxWxH) mm.
- Weight: 10gm (without Hat).
- 2.54mm pin interface leads.
- Operating Voltage: 5V.
- Long service life and stable performance.
- Standard interface and electronic building blocks.
- Widely use in Arduino DIY projects.
SKU: EAP-000066 - Detection & Sensor Module, Electronic Parts, Module
GY-906 MLX90614 Non-Contact Precision Infrared Temperature Sensor Module
In StockDetection & Sensor Module, Electronic Parts, ModuleGY-906 MLX90614 Non-Contact Precision Infrared Temperature Sensor Module
19 in stock- Easy to integrate
- Mounted on a breakout board with two types of pins
- 10k Pull up resistors for the I2C interface with optional solder jumpers
- Factory calibrated in temperature range:
- -40+125°C for sensor temperature
- -70+380°C for object temperature
- High accuracy of 0.5°C over wide temperature range (+50°C for both) High (medical) accuracy calibration
- Measurement resolution of 0.02°C
- Single and dual zone versions
- SMBus compatible digital interface
- Customizable PWM output for continuous reading
SKU: EAP-000122 - Detection & Sensor Module, Electronic Parts, Module
HTU21D Temperature and Humidity Sensor Module
Stock outDetection & Sensor Module, Electronic Parts, ModuleHTU21D Temperature and Humidity Sensor Module
Out of stock- ​Uses the I2C interface
- Typical humidity accuracy of ±2%
- Typical temperature accuracy of ±0.3C
- Operates from 0 to 100% humidity but this sensor isn’t recommended for harsh environments where it could come in contact with water (such as rain)
- 3.3V sensor – use inline logic level converters or 10k resistors to limit 5V signals
- Only one HTU21D sensor can reside on the I2C bus at a time
SKU: EAP-000002 - Electronic Parts, Module
I2C Expander Module
27 in stock- Operating Voltage: 5V
- Backlight and Contrast is adjusted by potentiometer
- Serial I2C control of LCD display using PCF8574
- Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable
- This is another great IIC/I2C/TWI/SPI Serial Interface
- With this I2C interface module, you will be able to realize data display via only 2 wires.
SKU: EAP-000114 - Electronic Parts, Module
IR Optocoupler Module
7 in stock- Use imported groove coupler sensor
- groove width 5 mm.
- The indicator lamp is off, the output is high, the output is low.
- Obscured, high output; unobstructed, low output
- Clean signal comparator output, good waveform, more than 15mA driving capability.
- Voltage 3.3 V – 5 V
- Output format: digital switching output (0 and 1)
- Fixed bolt holes for easy installation
SKU: EAP-000104 - Electronic Parts, Module
IR Receiver Module
112 in stock- Can detect a flame or in a 760 nanometer wavelength of ~ 1100 nm range of the light, lighter flame test distance of 80cm, for the greater flame, the farther the distance test
- The detection angle of 60 degrees or so, particularly sensitive to the flame spectrum
- Sensitivity adjustable (shown in blue digital potentiometer adjustment)
- the comparator output signal clean, good waveform, driving ability, more than 15mA
- With adjustable precision potentiometer sensitivity adjustment
- The working voltage of 3.3V-5V
- The output format: DO digital switching outputs (0 and 1) and AO analog voltage output
- A fixed bolt holes for easy installation
SKU: EAP-000108 - Electronic Parts, Module, Motor Driver Module
IRF520 MOSFET Driver Module
6 in stock- Voltage: 3.3 – 5V.
- Ports: Digital Level.
- Output load voltage: 0-24 V.
- Output load current: <5A (1A above need to add heat sink).
- Platform: Arduino, MCU, ARM, raspberry pi.
- Using original IRF520 Power MOS, you can adjust the output PWM
SKU: EAP-000120 - Electronic Parts, Module
MAX7219 Dot Matrix LED Display Module (1×1)
19 in stock- Requires only 3 communication wires of MCU
- Pre-cascaded MAX7219 Dot Matrix LED Module.
- The overall size of the display is very compact
- The PCB features M3 holes for mounting.
- Module with input and output interfaces
- Support for cascading multiple modules
- Quite large display
- Work Temperature:-25℃~85℃
- Work Humidity:5%~95%RH
- Input Voltage: 3.7 to 5.3 V
SKU: EAP-000124 - Electronic Parts, Module
MAX7219 Dot Matrix LED Display Module (1×4)
Out of stock- Requires only 3 communication wires of MCU
- Pre-cascaded MAX7219 Dot Matrix LED Module.
- The overall size of the display is very compact
- The PCB features M3 holes for mounting.
- Module with input and output interfaces
- Support for cascading multiple modules
- Quite large display
- Work Temperature:-25℃~85℃
- Work Humidity:5%~95%RH
- Input Voltage: 3.7 to 5.3 V
SKU: EAP-000125 - Electronic Parts, Module
MAX7219 Dot Matrix LED Display Module (2×2)
Out of stock- Requires only 3 communication wires of MCU
- Pre-cascaded MAX7219 Dot Matrix LED Module.
- The overall size of the display is very compact
- The PCB features M3 holes for mounting.
- Module with input and output interfaces
- Support for cascading multiple modules
- Quite large display
- Work Temperature:-25℃~85℃
- Work Humidity:5%~95%RH
- Input Voltage: 3.7 to 5.3 V
SKU: EAP-000126 - Detection & Sensor Module, Electronic Parts, Module
MFRC-522 RFID Reader Module
109 in stock- RC522 Features
- 13.56MHz RFID module
- Operating voltage: 2.5V to 3.3V
- Communication : SPI, I2C protocol, UART
- Maximum Data Rate: 10Mbps
- Read Range: 5cm
- Current Consumption: 13-26mA
- Power down mode consumption: 10uA (min)
SKU: EAP-000005
